- Home
- Products
- PC Resin
- FIPC (Formosa Idemitsu Petrochemical Corporation)
- General Purpose Grade
FCFC PC resin (TAIRILITE® PC Resin) and FIPC PC resin (TARFLON® PC Resin), using the state of phosgene polymerization process from IDEMITSU, JAPAN, with good quality management system. The product had supplied to inject, blow, extrusion molding and other processing industries, due to PC with high physical strength and high transparency, etc. Thus the end product can be widely utilized in home appliances, vehicle lamps and components, food containers, equipment housing, outdoor visor and optics parts. The R&D center & the full laboratory equipment and testing equipment well equipped will be supportivetoour new grade development and the setup ofrelevant processing guideas well. The factory production equipment adopted strict environmental standards, and the production technology is mature and stable, non-polluting theenvironmentconcerns.
| Model | Applications | Physical | Features | Attach | Operating | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IR1700
PC RESIN
General Purpose Grade
|
Relay cases, Timer cases, Packs, Decorative lighting covers, Cups and glasses, Dishes, Electrical equipment, Safety lamps, Explosion-proof gloves, Contact lens cases. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):26
Charpy (ISO 179-1):40 kJ/m2
FM(ISO 179):2.3 GPa TS(ISO 527-1,2):65 MPa Viscosity:Lowest
1. Highest impact strength among plastics 2. High transparency 3. Wide usable temperature rang 4. Excellent dimensional accuracy and stability 5. Excellent electrical properties
6. Meets UL standard
|
|
|||||||||||||||||||||
|
IR1900
PC RESIN
General Purpose Grade
|
Relay cases, Timer cases, Packs, Decorative lighting covers, Cups and glasses, Dishes, Electrical equipment, Safety lamps, Explosion-proof gloves, Contact lens cases. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):19
Charpy (ISO 179-1):70 kJ/m2
FM(ISO 179):2.3 GPa TS(ISO 527-1,2):65 MPa Viscosity:Low
1. Highest impact strength among plastics 2. High transparency 3. Wide usable temperature rang 4. Excellent dimensional accuracy and stability 5. Excellent electrical properties 6. Meets UL standard |
|
|||||||||||||||||||||
|
IR2200
PC RESIN
General Purpose Grade
|
Relay cases, Timer cases, Packs, Decorative lighting covers, Cups and glasses, Dishes, Electrical equipment, Safety lamps, Explosion-proof gloves, Contact lens cases. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):11
Charpy (ISO 179-1):80 kJ/m2
FM(ISO 179):2.3 GPa TS(ISO 527-1,2):65 MPa Viscosity:Medium
1. Highest impact strength among plastics
2. High transparency
3. Wide usable temperature rang
4. Excellent dimensional accuracy
and stability
5. Excellent electrical properties
6. Meets UL
standard
|
|
|||||||||||||||||||||
|
IR2500
PC RESIN
General Purpose Grade
|
Relay cases, Timer cases, Packs, Decorative lighting covers, Cups and glasses, Dishes, Electrical equipment, Safety lamps, Explosion-proof gloves, Contact lens cases. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):7
Charpy (ISO 179-1):80 kJ/m2
FM(ISO 179):2.2 GPa
TS(ISO 527-1,2):65 MPa
1. Highest impact strength among plastics
2. High transparency
3. Wide usable temperature rang
4. Excellent dimensional accuracy
and stability
5. Excellent electrical properties
6. Meets UL
standard
|
|