- Home
- Products
- PC Resin
- FIPC (Formosa Idemitsu Petrochemical Corporation)
- Weatherability
FCFC PC resin (TAIRILITE® PC Resin) and FIPC PC resin (TARFLON® PC Resin), using the state of phosgene polymerization process from IDEMITSU, JAPAN, with good quality management system. The product had supplied to inject, blow, extrusion molding and other processing industries, due to PC with high physical strength and high transparency, etc. Thus the end product can be widely utilized in home appliances, vehicle lamps and components, food containers, equipment housing, outdoor visor and optics parts. The R&D center & the full laboratory equipment and testing equipment well equipped will be supportivetoour new grade development and the setup ofrelevant processing guideas well. The factory production equipment adopted strict environmental standards, and the production technology is mature and stable, non-polluting theenvironmentconcerns.
| Model | Applications | Physical | Features | Attach | Operating | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IV1900R(<380 nm cut)
PC RESIN
Weatherability Grade
|
IV-R grade is listed in AMECA, can used for car headlamp, lighting equipment and various outdoor applications. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):19
Charpy (ISO 179-1):70 kJ/m2
FM(ISO 179):2.3 GPa TS(ISO 527-1,2):65 MPa UV-stabilized PC with UV cut-off under 380 nm, iced-clear color, and good mold release property. |
|
|||||||||||||||||||||
|
IV2200R(<380 nm cut)
PC RESIN
Weatherability Grade
|
IV-R grade is listed in AMECA, can used for car headlamp, lighting equipment and various outdoor applications. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):11
Charpy (ISO 179-1):80 kJ/m2
FM(ISO 179):2.3 GPa TS(ISO 527-1,2):65 MPa UV-stabilized PC with UV cut-off under 380 nm, iced-clear color, and good mold release property. |
|
|||||||||||||||||||||
|
IV2500(<380 nm cut)
PC RESIN
Weatherability Grade
|
IV grade is mainly used for safety glasses, sun glasses and daylight roof. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):7
Charpy (ISO 179-1):80 kJ/m2
FM(ISO 179):2.2 GPa TS(ISO 527-1,2):65 MPa UV-stabilized PC with UV cut-off under 380 nm, iced-clear color. |
|
|||||||||||||||||||||
|
VT2500(<400 nm cut)
PC RESIN
Weatherability Grade
|
VT grade is also mainly used for safety glasses, sun glasses and daylight roof. |
To print, please click on the attached standard physical properties table.
|
MI(ISO 1133):7
Charpy (ISO 179-1):80 kJ/m2
FM(ISO 179):2.2 GPa TS(ISO 527-1,2):65 MPa UV-stabilized PC with UV cut-off under 400 nm, iced-clear color and good mold release property. |
|