Transparent flame retardant

FCFC PC resin (TAIRILITE® PC Resin) and FIPC PC resin (TARFLON® PC Resin), using the state of phosgene polymerization process from IDEMITSU, JAPAN, with good quality management system. The product had supplied to inject, blow, extrusion molding and other processing industries, due to PC with high physical strength and high transparency, etc. Thus the end product can be widely utilized in home appliances, vehicle lamps and components, food containers, equipment housing, outdoor visor and optics parts. The R&D center & the full laboratory equipment and testing equipment well equipped will be supportivetoour new grade development and the setup ofrelevant processing guideas well. The factory production equipment adopted strict environmental standards, and the production technology is mature and stable, non-polluting theenvironmentconcerns.

ISO9001，ISO14000

Transparent flame retardant

Model

Applications

Physical

Features

Attach

Operating

AC3843

PC RESIN

Transparent Flame Retardant Grade

Transparent flame-retardant injection parts.

ASTM Data Sheet
ISO Data Sheet

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ASTM D-1238	12	300℃×1.2kg	g/10 min






IZOD Impact Strength	ASTM D-256


		80	23℃, 3.2mm, Notched	kg-cm/cm










Specific Gravity	ASTM D-792	1.2	23℃	-


Tensile Strength	ASTM D-638
		710	23 ℃，50mm/min	kg/cm²


Flexural Strength	ASTM D-790
		1100	23 ℃, 2mm/min	kg/cm²


Flexural Modulus	ASTM D-790
		22000	23 ℃, 2mm/min	kg/cm²


Rockwell Hardness	ASTM D-785	R-122	23 ℃	R-scale
Heat Deflection Temperature	ASTM D-648	128	Unannealed, 18.6kg/cm², 3.2mm, 120℃/h	℃










Molding Shrinkage	ASTM D-955
		0.5 ~ 0.7	-	%


Transmissin	ASTM D-1003	>87	3.2mm	%
Haze	ASTM D-1003	<1.0	3.2mm	%
Flammability	UL94 / UL746B / UL746C	3.0mm V0 RTI 130℃ f1 All Color	FILE NO. E162823	-
Combustibility	UL-94	v-0 3 mm	File No. E162823	-

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ISO 1133
		12	300℃ × 1.2kg	g/10 min






Charpy Impact Strength	ISO 179


		75	23℃, 4mm, Notched	kJ/m²
Specific Gravity	ISO 1183	1.2	23℃	-
Specific Gravity	ISO 1183
Tensile Strength	ISO 527	70	23 ℃，50mm/min	Mpa


Flexural Strength	ISO 178	108	23 ℃，2mm/min	Mpa
Flexural Strength	ISO 178
Flexural Modulus	ISO 178	2155	23 ℃，2mm/min	Mpa
Flexural Modulus	ISO 178
Rockwell Hardness	ISO 2039-2	R-122	23℃	R-scale
Heat Deflection Temperature	ISO 75/A


		128	Unannealed, 1.8Mpa, 4mm, 120℃/h	℃




Molding Shrinkage	ISO 2577	0.5 ~ 0.7	-	%
Molding Shrinkage	ISO 2577
Transmissin	ISO 13468/1	> 87	3.2mm	%
Haze	ISO 14782	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 3 mm	File No. E162823	-

To print, please click on the attached standard physical properties table.

Transparency,
Flame retardant,
Mid-low flow,
UV resistance,
Halogen free.

AC3853

PC RESIN

Transparent Flame Retardant Grade

Transparent flame-retardant injection parts.

ASTM Data Sheet
ISO Data Sheet

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ASTM D-1238		300℃×1.2kg	g/10 min






IZOD Impact Strength	ASTM D-256


		80	23℃, 3.2mm, Notched	kg-cm/cm










Specific Gravity	ASTM D-792	1.2	23℃	-


Tensile Strength	ASTM D-638
		710	23 ℃，50mm/min	kg/cm²


Flexural Strength	ASTM D-790
		1100	23 ℃, 2mm/min	kg/cm²


Flexural Modulus	ASTM D-790
		22000	23 ℃, 2mm/min	kg/cm²


Rockwell Hardness	ASTM D-785	R-122	23 ℃	R-scale
Heat Deflection Temperature	ASTM D-648	128	Unannealed, 18.6kg/cm², 3.2mm, 120℃/h	℃










Molding Shrinkage	ASTM D-955
		0.5 ~ 0.7	-	%


Transmissin	ASTM D-1003	> 87	3.2mm	%
Haze	ASTM D-1003	< 1.0	3.2mm	%
Flammability	UL94 / UL746B / UL746C	2.5mm V0 RTI 130℃ f1 All Color	FILE NO. E162823	-
Combustibility	UL-94	v-0 2.5 mm	File No. E162823	-

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ISO 1133
		12	300℃ × 1.2kg	g/10 min






Charpy Impact Strength	ISO 179


		75	23℃, 4mm, Notched	kJ/m²
Specific Gravity	ISO 1183	1.2	23℃	-
Specific Gravity	ISO 1183
Tensile Strength	ISO 527	70	23 ℃，50mm/min	Mpa


Flexural Strength	ISO 178	108	23 ℃，2mm/min	Mpa
Flexural Strength	ISO 178
Flexural Modulus	ISO 178	2155	23 ℃，2mm/min	Mpa
Flexural Modulus	ISO 178
Rockwell Hardness	ISO 2039-2	R-122	23℃	R-scale
Heat Deflection Temperature	ISO 75/A


		128	Unannealed, 1.8Mpa, 4mm, 120℃/h	℃




Molding Shrinkage	ISO 2577	0.5 ~ 0.7	-	%
Molding Shrinkage	ISO 2577
Transmissin	ISO 13468/1	> 87	3.2mm	%
Haze	ISO 14782	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 2.5 mm	File No. E162823	-

To print, please click on the attached standard physical properties table.

Transparency,
Flame retardant,
Mid-low flow,
UV resistance,
Halogen free.

AC3854

PC RESIN

Transparent Flame Retardant Grade

Transparent flame-retardant injection parts.

ASTM Data Sheet
ISO Data Sheet

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ASTM D-1238	12	300℃×1.2kg	g/10 min






IZOD Impact Strength	ASTM D-256


		80	23℃, 3.2mm, Notched	kg-cm/cm










Specific Gravity	ASTM D-792	1.2	23℃	-


Tensile Strength	ASTM D-638
		710	23 ℃，50mm/min	kg/cm²


Flexural Strength	ASTM D-790
		1100	23 ℃, 2mm/min	kg/cm²


Flexural Modulus	ASTM D-790
		22000	23 ℃, 2mm/min	kg/cm²


Rockwell Hardness	ASTM D-785	R-122	23 ℃	R-scale
Heat Deflection Temperature	ASTM D-648	128	Unannealed, 18.6kg/cm², 3.2mm, 120℃/h	℃










Molding Shrinkage	ASTM D-955
		0.5 ~ 0.7	-	%


Transmissin	ASTM D-1003	> 87	3.2mm	%
Haze	ASTM D-1003	< 1.0	3.2mm	%
Flammability	UL94 / UL746B / UL746C	2.5mm V0 RTI 130℃ f1 All Color	FILE NO. E162823	-
Combustibility	UL-94	v-0 2.5 mm	File No. E162823	-

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ISO 1133
		12	300℃ × 1.2kg	g/10 min






Charpy Impact Strength	ISO 179


		70	23℃, 4mm, Notched	kJ/m²
Specific Gravity	ISO 1183	1.2	23℃	-
Specific Gravity	ISO 1183
Tensile Strength	ISO 527	70	23 ℃，50mm/min	Mpa


Flexural Strength	ISO 178	108	23 ℃，2mm/min	Mpa
Flexural Strength	ISO 178
Flexural Modulus	ISO 178	2155	23 ℃，2mm/min	Mpa
Flexural Modulus	ISO 178
Rockwell Hardness	ISO 2039-2	R-122	23℃	R-scale
Heat Deflection Temperature	ISO 75/A


		128	Unannealed, 1.8Mpa, 4mm, 120℃/h	℃




Molding Shrinkage	ISO 2577	0.5 ~ 0.7	-	%
Molding Shrinkage	ISO 2577
Transmissin	ISO 13468/1	> 87	3.2mm	%
Haze	ISO 14782	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 2.5 mm	File No. E162823	-

To print, please click on the attached standard physical properties table.

Transparency,
Flame retardant,
Mid-low flow,
UV resistance,
Halogen free.

AC3832

PC RESIN

Transparent Flame Retardant Grade

Transparent flame-retardant sheet and injection parts.

ASTM Data Sheet
ISO Data Sheet

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ASTM D-1238	5.0	300℃×1.2kg	g/10 min






IZOD Impact Strength	ASTM D-256


		75	23℃, 3.2mm, Notched	kg-cm/cm










Specific Gravity	ASTM D-792	1.2	23℃	-


Tensile Strength	ASTM D-638
		710	23 ℃，50mm/min	kg/cm²


Flexural Strength	ASTM D-790
		1100	23 ℃, 2mm/min	kg/cm²


Flexural Modulus	ASTM D-790
		22000	23 ℃, 2mm/min	kg/cm²


Rockwell Hardness	ASTM D-785	R-122	23 ℃	R-scale
Heat Deflection Temperature	ASTM D-648	128	Unannealed, 18.6kg/cm², 3.2mm, 120℃/h	℃










Molding Shrinkage	ASTM D-955
		0.5 ~ 0.7	-	%


Transmissin	ASTM D-1003	> 87	3.2mm	%
Haze	ASTM D-1003	< 1.0	3.2mm	%
Flammability	UL94 / UL746B / UL746C	1.0mm V0 3.0mm 5VA RTI 130℃, f1 All Color	FILE NO. E162823	-
Combustibility	UL-94	v-0 1 mm 5VA 3 mm	File No. E162823	-

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ISO 1133
		5	300℃ × 1.2kg	g/10 min






Charpy Impact Strength	ISO 179


		70	23℃, 4mm, Notched	kJ/m²
Specific Gravity	ISO 1183	1.2	23℃	-
Specific Gravity	ISO 1183
Tensile Strength	ISO 527	70	23 ℃，50mm/min	Mpa


Flexural Strength	ISO 178	108	23 ℃，2mm/min	Mpa
Flexural Strength	ISO 178
Flexural Modulus	ISO 178	2155	23 ℃，2mm/min	Mpa
Flexural Modulus	ISO 178
Rockwell Hardness	ISO 2039-2	R-122	23℃	R-scale
Heat Deflection Temperature	ISO 75/A


		128	Unannealed, 1.8Mpa, 4mm, 120℃/h	℃




Molding Shrinkage	ISO 2577	0.5 ~ 0.7	-	%
Molding Shrinkage	ISO 2577
Transmissin	ISO 13468/1	> 87	3.2mm	%
Haze	ISO 14782	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 1 mm 5VA 3 mm	File No. E162823	-

To print, please click on the attached standard physical properties table.

Transparency,
Flame retardant,
Low flow,
UV resistance,
Halogen free.

AC3873

PC RESIN

Transparent Flame Retardant Grade

Transparent flame-retardant sheet and injection parts.

ASTM Data Sheet
ISO Data Sheet

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ASTM D-1238	5.0	300℃×1.2kg	g/10 min






IZOD Impact Strength	ASTM D-256


		75	23℃, 3.2mm, Notched	kg-cm/cm










Specific Gravity	ASTM D-792	1.2	23℃	-


Tensile Strength	ASTM D-638
		710	23 ℃，50mm/min	kg/cm²


Flexural Strength	ASTM D-790
		1100	23 ℃, 2mm/min	kg/cm²


Flexural Modulus	ASTM D-790
		22000	23 ℃, 2mm/min	kg/cm²


Rockwell Hardness	ASTM D-785	R-122	23 ℃	R-scale
Heat Deflection Temperature	ASTM D-648	128	Unannealed, 18.6kg/cm², 3.2mm, 120℃/h	℃










Molding Shrinkage	ASTM D-955
		0.5 ~ 0.7	-	%


Transmissin	ASTM D-1003	> 87	3.2mm	%
Haze	ASTM D-1003	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 1.5 mm	File No. E162823	-

Property	Test Method	Value	Test Condition	Unit
Melt Flow Index	ISO 1133
		5	300℃ × 1.2kg	g/10 min






Charpy Impact Strength	ISO 179


		70	23℃, 4mm, Notched	kJ/m²
Specific Gravity	ISO 1183	1.2	23℃	-
Specific Gravity	ISO 1183
Tensile Strength	ISO 527	70	23 ℃，50mm/min	Mpa


Flexural Strength	ISO 178	108	23 ℃，2mm/min	Mpa
Flexural Strength	ISO 178
Flexural Modulus	ISO 178	2155	23 ℃，2mm/min	Mpa
Flexural Modulus	ISO 178
Rockwell Hardness	ISO 2039-2	R-122	23℃	R-scale
Heat Deflection Temperature	ISO 75/A


		128	Unannealed, 1.8Mpa, 4mm, 120℃/h	℃




Molding Shrinkage	ISO 2577	0.5 ~ 0.7	-	%
Molding Shrinkage	ISO 2577
Transmissin	ISO 13468/1	> 87	3.2mm	%
Haze	ISO 14782	< 1.0	3.2mm	%
Combustibility	UL-94	v-0 1.5 mm	File No. E162823	-

To print, please click on the attached standard physical properties table.

Transparency,
Flame retardant,
Low flow,
UV resistance,
Halogen free.