Homopolymer PP
The TAIRIPRO PP produced from FCFC are all stored in a warehouse with good protective equipment, packaging integrity, and appropriate storage environment (temperature <40’C , humidity <80%), its shelf life for at least 2 years. However customer's storage environment conditions might not fully follow this requirement, it is recommended that customers from the acquisition of polypropylene pellets should be used within six months of completion.
PP Resin storage and Validity
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
B1101 Homopolymer PP RESIN
Extrusion & Blow Molding
|
Thermoforming Sheet, PP-H pipe, Tray, Blow molding | Excellent melt strength, Deep drawing |
To print, please click on the attached standard physical properties table.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
T1002 Homopolymer PP RESIN
Extrusion & Blow Molding
|
Corrugated sheet, Strapping, Bottles | Excellent tensile strength
|
To print, please click on the attached standard physical properties table.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
T1202 Homopolymer PP RESIN
Extrusion & Blow Molding
|
Blow molding | high stiffness, heat resistance, clarity
MI(230℃×2.16kg):1.6 Izod(ASTM,1/8"):4.5
FM(ASTM):18000 TS(ASTM):380
|
To print, please click on the attached standard physical properties table.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
T2502 Homopolymer PP RESIN
Extrusion & Blow Molding
|
Transparency pressure forming sheet,Portfolio, Bottles | High stiffiness, Good transparency, Good heat resistance
|
To print, please click on the attached standard physical properties table.
|
|
|
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
F2003 Homopolymer PP RESIN
BOPP
|
Flexible & Rigid packaging, Cigarette wraps, Adhesive tape, House wares, labels | High stiffness, High clarity
|
To print, please click on the attached standard physical properties table.
|
|
|
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
S1003 Homopolymer PP RESIN
Flat Yarn Grade
|
Portfolio, Yarn: Woven bag, Carpet, Backing, Ropes, Monofilament: Brushes, Ropes, Nettings | Good stretchability
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
S1005 Homopolymer PP RESIN
Flat Yarn Grade
|
Portfolio, Straw | Good stretchability, Good processability
|
To print, please click on the attached standard physical properties table.
|
|
|
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
K1011 Homopolymer PP RESIN
Injection Molding Grade
|
General purpose, Foodcontainers, Electrical appliances, Housewares meets the requirements of USP Plastic Class VI |
Good stiffness,
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1011AG Homopolymer PP RESIN
Injection Molding Grade
|
Electric appliance parts,RTI=125℃ | Long term heat resistance,High stiffness,Good luster
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1023 Homopolymer PP RESIN
Injection Molding Grade
|
Thin wall parts,Housewares,Toys,meets the requirements of USP Plastic Class VI |
High fluidity,
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1035 Homopolymer PP RESIN
Injection Molding Grade
|
Thin wall parts , Housewares , Toys |
High fluidity,
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1080 Homopolymer PP RESIN
Injection Molding Grade
|
Thin wall parts , Housewares , Toys | Ultra high fluidity, Good stiffness, Good luster
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1108 Homopolymer PP RESIN
Injection Molding Grade
|
General purpose, Foodcontainers, Electrical appliances, Housewares | Good stiffness, Good luster
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K1525 Homopolymer PP RESIN
Injection Molding Grade
|
microwave containers, Food containers |
High fluidity, High Stiffness , Good luster, Good
|
To print, please click on the attached standard physical properties table.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K2051 Homopolymer PP RESIN
Injection Molding Grade
|
Thinner Wall Parts, Microwave containers, House wares,Toys |
Super high fluidity,
|
To print, please click on the attached standard physical properties table.
|
|
|
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
S1019 Homopolymer PP RESIN
Multi-Filament Grade
|
Staple fiber, ES fiber & PP staple fiber | Controlled rheology, Good softness, Anti gas fading
|
To print, please click on the attached standard physical properties table.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
S1040 Homopolymer PP RESIN
Multi-Filament Grade
|
Nonwoven, Fine Denier staple fiber | Controlled rheology, Compact Spinning, Anti gas fading
|
To print, please click on the attached standard physical properties table.
|
|
|
| Model | Applications | Features | Attachments | Physical | Comparison | Contact | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
F1611 Homopolymer PP RESIN
Blown Film Grade
|
packaging in General | High slip, Anti-block
|
To print, please click on the attached standard physical properties table.
|
|
|